Hydraulic dual cylinder hot melt kettle Road marking equipment Hot melt kettle Mechanical dual cylinder hot melt kettle

Main technical parameters of hot melt kettle
Engine: 15PS electric start evaporative water-cooled diesel engine
Hydraulic transmission system: Multi way hydraulic control valve, forward and reverse stirring, continuously variable speed
Internal structure of kettle: double-layer pot wall CM01 control fire channel

Hydraulic motor: BM 500 type
Hydraulic oil tank capacity: 70 liters
Structure: Frame structure, double-layer insulation material is installed between the inner and outer walls of the kettle body
Heating system: liquefied petroleum gas (recommended to use 50kg tank), using direct injection furnace
Melting tank: can accommodate 600kg x 2 (800 pots: 400kg x 2)
Exterior structure: high-strength, high temperature resistant, and gasification resistant stainless steel plate structural design
Safety device: a specially designed overload overflow device that can prevent accidental operation
Size and reset: 1900 * 1660 * 1630mm 900kg (800 kettle: 1880 * 1430 * 1480mm 800kg)
The hydraulic dual cylinder hot melt kettle is used for hot melt coating in hot melt marking construction. Its principle is to use a diesel engine as the power source, and drive the hydraulic motor through a hydraulic device to drive the mixing blade to stir. It can stir in both directions to ensure uniform mixing. The gas stove directly heats the bottom of the kettle, causing the coating to reach a molten state and continuously supplying it to the marking machine for coating and marking. This product has the characteristics of uniform stirring, fast heating speed, energy saving, low noise, simple operation, and easy maintenance.
The hydraulic dual cylinder hot melt kettle is the main equipment for hot melt marking construction. The equipment uses a diesel engine as power to drive the hydraulic device, which drives the hydraulic motor and the mixing integrated directional valve. The mixer can mix in both forward and reverse directions, and the gas stove directly heats the bottom of the kettle, making the coating reach a molten state and supplying it in bulk to the melting machine of the marking machine for marking. This product is widely used and has been improved to adopt a dual starting method of electric and manual starting. It has the characteristics of uniform mixing, low noise, good insulation, fast heating, and easy operation, which plays a good role in improving construction efficiency.