Road Marking Paint and Machine Manufacturer
+86-15668659958
| Model | Normal white reflective type | Normal white general type | Normal white smooth and low density type | Normal white soft sticky type |
| Item | ||||
| Liquidity（g/mm²） | 75 | 91.4 | 93 | 92.4 |
| Actual density Gram/cm³ | 2.25 | 2.25 | 2.1 | 2.23 |
| Softening point ℃ | 106 | 106 | 122 | 112 |
| Luminance factor | 0.81 | 0.76 | 0.76 | 0.79 |
| Applying temperature℃ | 210 | 200 | 210 | 200 |
| Precipitation mm | No stratification | Few stratification | No stratification | No stratification |
| Whiteness | 72 | 69 | 67 | 70 |
| mpa/50℃ impact resistance | 2.34 | 2.25 | 3.9 | 2.4 |
| Melting state | Normal | Normal | Normal | Normal |
| Organic matter content | 11.73% | 11.92% | 13.5% | 12.11% |
| inorganic matter content | 88.27% | 88.07% | 86.50% | 87.88% |
| JT/T280-2004 Standard | Conform | Conform | Conform | Conform |
| Features of the paints | 1. Excellent whiteness and luminance factor, retroreflective rate easily more than 300. 2. Strong versatility, especially suitable for new asphalt pavements. 3. Normal impact resistance and drying speed in summer. 4. Basically no precipitation. | 1. All performance indicators are relatively balanced and meet national standards. It is versatile and suitable for various construction environments. 2. The whiteness is above normal, the luminance factor meets national standards, and the retroreflective rate above 250. 3. The impact resistance and drying speed are normal in summer. 4. There is basically no precipitation. | 1. Super soft and sticky, very smooth, moderate viscosity. 2. The total organic matter content is as high as 14%, the total volume after melting is relatively larger, and with more volume doses. 3. The whiteness is normal, the luminance factor meets the national standard, and the retroreflective rate can be above 200. 4. The impact resistance and drying speed in summer are normal. 5. No precipitation. | 1. Soft and sticky, like strong liquor hanging on the cup , with moderate viscosity. 2. With relatively more volume dose. 3. Whiteness is above normal, luminance factor meets national standards, and retroreflective rate can be measured above 200. 4. Impact resistance and drying speed in summer are above normal. 5. No precipitation. |
| C5 Petroleum Resin | We use C5 petroleum resin with high content of isoprene, which has light color, high heating stability, good fluidity, and stronger adhesion. |
Plasticizers | Using a plasticizer specifically designed for hot melt coatings, it has a high molecular weight and boiling point, making it less prone to precipitation. Make the coating have excellent elongation and flexibility. |
Titanium Dioxide | Rutile type titanium dioxide, covered with aluminum coating, has excellent dispersibility, weather resistance, and coverage, and extremely high whiteness. The brightness factor of the markings has been greatly improved. |
| EVA | High VA content, excellent flexibility, and good compatibility with C5 petroleum resin, significantly improving the adhesion and flexibility of the coating, preventing cracking. |
PE Wax | A specialized PE wax synthesized based on the characteristics of hot melt coatings has a narrow molecular weight distribution,excellent lubricity, dispersibility, and anti settling properties. It also has faster drying time, higher compressive strength,and better texture. |
Calcium Carbonate Powder | We use the best mineral resources from China’s production areas and have the best whiteness in China. Reasonable particle size distribution, low oil absorption, better integration with C5 petroleum resin, high compressive strength, good fluidity, and excellent anti settling properties of the coating. |
| Pre mixed Glass Beads | Produced in a horizontal furnace, the glass beads have a roundness of over 95%, are crystal clear and transparent, and have excellent reflectivity. |
| Medium Chrome Yellow | High temperature resistance, high weather resistance, strong coloring power, long-lasting color |
