Road Marking Paint and Machine Manufacturer
+86-15668659958
-
07-28/2025Difficulties and solutions in the construction of hot-melt road markings on cement pavement
Due to its rigidity and surface characteristics, cement pavement imposes higher requirements on the construction of road markings – problems such as insufficient adhesion and easy foaming and cracking occur frequently, directly affecting the service life and driving safety of road markings. TOP ROAD Transportation Technology Co., Ltd. has been deeply involved in the field […]
Read More -
07-24/2025Urban Road Upgrade: Innovative Application of Hot Melt Road Coatings for Road Surface Color Modification in Renovation Projects
In today’s urban development, the upgrading of municipal roads is not only about updating infrastructure, but also an important guarantee for the image and safety of the city. Due to long-term use, old road surfaces often experience problems such as fading, wear, and reduced functionality, which affect driving safety and urban aesthetics. TOP ROAD Transportation […]
Read More -
07-23/2025The problem of poor coverage during the color changing construction of light colored road surfaces
Road surface color changing coatings are an important means of improving the aesthetics and functionality of roads, and light colors (such as beige, light yellow, and light gray) are widely used in urban roads, scenic trails, and other scenes due to their fresh visual effects. However, the problem of “poor coverage rate” often occurs during […]
Read More -
07-22/2025Construction must see: Quick solution for curved and rough edges of road hot-melt marking paint
The aesthetic appearance of road markings directly affects the visual order and driving safety of the road, but problems such as wavy lines, edge burrs, and misaligned joints often occur during the construction of hot-melt markings. TOP ROAD Technology Co., Ltd. combines over a thousand engineering practices to deeply analyze the causes of linear defects […]
Read More -
07-21/2025Road hot-melt coatings also vary in spring, summer, autumn, and winter: Who is the relationship between reflective attenuation of marking hot-melt coatings and the performance of hot-melt road coatings
The most critical performance indicator of road marking coatings, detailed requirements refer to relevant international standards The performance of hot-melt road traffic markings is related to the content of organic matter (the total amount of organic matter that can be volatilized at 520 ℃ of muffle furnace), the degradation performance of organic matter (ultraviolet resistance, […]
Read More -
07-18/2025Key points for on-site inspection of road marking paint manufacturers: from production line to quality inspection process
In the construction of road marking projects, the quality of paint directly affects the durability, reflective effect, and construction efficiency of the markings. TOP ROAD Transportation Technology Co., Ltd., as a leading supplier of road marking coatings in the industry, has provided reliable marking solutions for many key projects with 30 years of professional accumulation […]
Read More -
07-17/2025Large scale construction temperature of hot-melt road coatings – making construction simpler
The temperature control during the construction of general hot-melt marking coatings is directly linked to the settlement of glass beads, and the depth of glass bead settlement also directly affects the reflectivity brightness coefficient of the marking. So can the temperature range for hot melt coating construction be relaxed, so that the construction team no […]
Read More -
07-16/2025【 Hot melt road cold spray marking foaming 】 Road moisture testing method
Solution to marking bubbles During marking construction, all road surfaces should be clean and dry. Moisture is the most harmful factor in the adhesion between coatings and road surfaces. The underground moisture content is sufficient to affect the correct coating adhesion. The morning dew and fog usually cause the road surface to become damp. If […]
Read More -
07-15/2025Technical requirements for anti slip hot-melt reflective marking/hot-melt road coatings
Technical requirements for anti slip white hot melt reflective coating: 项目 技术要求 容器中状态 应干燥、无结块、无杂质，搅拌后呈均匀松散状态 预混玻璃珠 预混玻璃珠含量，% ≥30 其中粒径850-1400μm含量不低于15%， 其中粒径300-850μm含量不低于15% 预混玻璃珠成圆率 低折射率玻璃珠成圆率不应小于80% 施划性能 在喷涂、刮涂、甩涂、成型时，施划性能应良好 涂层性能 涂层外观 干燥后，涂层应无皱纹、斑点、起泡、裂纹、脱落、粘胎等现象，颜色均匀一致。 色品坐标 1 2 3 4 x 0.350 0.305 0.295 0.340 y 0.360 0.315 0.325 0.370 亮度因数 ≥0.80 耐水性 在水中浸泡24h应无变色、起皱、起泡，开裂等现象 耐碱性 在氢氧化钙饱和溶液中浸泡24h应无变色、起皱、起泡，开裂等现象 密度D，g/cm² 1.8≤D≤2.3 软化点ST，℃ 100≤ST≤140 不粘胎干燥时间，min ≤5 抗压强度Mpa （23±1）℃ […]
Read More -
07-14/2025How to distinguish between two-component and multi-component marking hot melt coatings
2-C: Two component marking coatings generally use a ratio mode of 100:1, 100:4, and 98:2, with different shapes of curing agents used in each form: Reactive component: Hardener Powder (BPO)=100:1 Reactive component: Powder Curing Agent (BPO)=100:1 reactive component : hardener beads 2000 = 100 : 4Reaction component: granular curing agent 2000=100:4 reactive component : liquid […]
Read More -
07-12/2025For every 100mcd increase in the reverse number of the edge solid line of road hot-melt paint, the traffic accident rate decreases by 8.6%
For every 100mcd increase in the reflectance brightness coefficient of the white edge solid line of traffic markings, the traffic safety accident rate decreases by 8.6%. For every 100mcd increase in the reflectance brightness coefficient of the white dashed line, the nighttime collision accidents and bicycle nighttime collision accidents decrease by 23.7%. Research on Reflective […]
Read More -
07-10/2025Road Hot Melt Marking Coatings: Development, Advantages, and TOP ROAD Characteristics
The Development History of Hot Melt Marking Coatings Historical Promotion ProcessHot melt marking paint, a new type of road safety marking paint that gradually gained popularity worldwide in the late 1960s, has now become the preferred choice for road markings in countries around the world. After more than 20 years of research and practice, significant […]
Read More -
07-09/2025Instruction Manual for Two-component Cold Spray Road Marking Machine (Pneumatic Glass Beads Dispenser)
Product Parameter Engine Honda GX200 Width of marking road lines 5-45cm Number of spray guns 2pcs Plunger pump flow 12L Pressure regulator tube length 15m Glass bead box 15L Power 6.5HP Thickness of marking road lines 0.2-1.0mm Number of plunger pump for paints 2pcs Working pressure 10-20mpa Plunger pump Daikin, Japan Double glass beads dispenser […]
Read More -
07-08/2025
2025 Road Hot Melt Coating Construction Technical Guidelines
This construction guide is only applicable to hot-melt reflective marking coatings with qualified flowability as specified in JT/T280-2025 edition of “Road Marking Coatings”. As long as all necessary conditions are met, including qualified coatings and the temperature of the road surface, moisture free road surface, minimum marking thickness, etc., the use of hot-melt reflective marking […]
Read More -
07-07/2025Can hot melt marking paint be applied on damp ground? Professional answers have arrived
In road marking construction, weather and ground conditions are often key factors affecting construction quality. Especially when encountering damp ground conditions, many construction teams may hesitate whether to apply hot-melt marking paint. So, can construction be carried out on damp ground? How should we respond? Today, we will discuss this issue in detail.The impact of […]
Read More -
07-04/2025From theory to practice: Construction guide for complex working conditions of two-component traffic marking coatings
In the construction of modern transportation infrastructure, two-component traffic marking coatings have become the preferred marking material for high-grade roads due to their excellent durability and environmental performance. However, in the face of complex and ever-changing road conditions, traditional construction techniques often struggle to ensure project quality. As a professional service provider in the field […]
Read More -
07-03/2025
Rainy season construction worry free: Professional solution for cold paint marking coatings
In the special environment of rainy season construction, the construction quality of cold paint marking coatings is facing severe challenges. As a professional service provider in the road marking industry, Henan San Aisi Transportation Technology Co., Ltd. provides comprehensive rainy season construction solutions with rich project experience to ensure that project quality and progress are […]
Read More -
07-01/2025Complete guide for maintenance and upkeep of road hot-melt coating, colored anti-skid pavement coating: tips for extending service life
In modern urban construction, colored anti-skid pavement coatings are widely used in urban roads, scenic trails, parking lots, and other places due to their excellent safety performance and aesthetic effects. As a professional service provider in the field of colored anti-skid road coatings, Henan San Aisi Transportation Technology Co., Ltd. brings you this comprehensive maintenance […]
Read More -
06-30/2025
Performance comparison and applicable scenarios of two-component marking coatings and hot-melt coatings
In modern road marking engineering, two-component marking coatings and hot-melt marking coatings, as the two mainstream materials, each exhibit unique performance advantages. As a professional service provider in the field of road safety, Henan San Aisi Transportation Technology Co., Ltd., with over ten years of industry experience, provides in-depth analysis of the core differences between […]
Read More -
06-27/2025Low cost marking of hot-melt road coating (bubble section)
As the temperature rises, the problems that are prone to occur during marking construction also increase; Bubbles appearing after the application of hot-melt marking paint are a common quality issue, which can seriously affect the appearance, durability, and reflective performance of the marking. Analysis of the moisture content of calcium powder, solvent content of petroleum […]
Read More