Formula and usage method of hot melt marking paint?

Hot melt road marking paint is a coating applied to roads to mark road markings. Hot melt is one of the processes for producing marking coatings. In today’s society, road marking is often carried out using hot melt coatings, which play a very important role. Today, the editor will unveil the mystery of hot melt coatings and take a look at their formulas and usage methods. Everyone, give me a lot of guidance.

Tools/raw materials
Carbon five resin 130 kg
Glass microbeads 2-3.5 (added as required)
Chlorinated paraffin or PE wax 10 kilograms
4 Titanium dioxide 18 (15-25)
Baisha 400 kg
Plasticizer 11.5 kg
Special whitening agent rqt – k-1180 to 200 grams (2 parts per ten thousand)
Hot melt marking machine

Method/Steps
one
Mix various raw materials of the coating together and stir thoroughly to ensure uniformity. Especially pay attention to adding RQT-K-1, a special fluorescent whitening agent for hot melt coatings, with a dosage of about 2/10000.
two
Pour the well mixed marking paint into the molten axe and start heating.
three
Heating to around 220 ℃, the coating hot melt process has been completed, and then the hot melt marking machine can start operating.
four
Finally, orderly draw lines according to the designated positions, wait for air drying, and the entire hot melt coating drawing process is completed, waiting for inspection to confirm compliance.

matters needing attention
The addition of specialized whitening agent rqt-k-1 should be between 180 and 200 grams, as excessive amounts may cause precipitation
All kinds of raw materials need to be thoroughly stirred evenly,
The heating time and temperature need to be strictly controlled.