Road Marking Paint and Machine Manufacturer
+86-15668659958
-
06-16/2025Marking of hot-melt road coatings to reduce costs and increase efficiency – coating density
Industry standard 1.8g/㏄ -2.3g/㏄ Coating dosage=Coating density x Volume of marking (marking area x marking thickness) Marking thickness 2mm Calculated density of 1.8g/cm ³ Coating dosage of 1 square meter 1 ㎡ Marking dosage (weight)=Volume * Density=2mm * 1 ㎡ * 1.8g/cm ³=3.6 kg/㎡ Coating dosage of 1 square meter with a density of 2.3g/cm […]
Read More -
06-12/2025Common problems in marking construction: Reflection of markings (Part 1)
No one can explain the reverse reflection of markings thoroughly. Most people only know one thing and don’t know the other. I plan to use two articles to thoroughly clarify the relationship between markings, glass beads, and reverse reflection detection equipment. This article focuses on glass beads and anti reflection detection equipment. The first article […]
Read More -
06-11/2025Selection of Coatings and Glass Beads for Cost Reduction and Efficiency Enhancement (Part 1)
Many times, after selecting coatings and glass beads according to project requirements, we either fail to meet the standards or exceed them significantly during acceptance, which greatly increases construction costs and causes unnecessary waste. So how to choose the combination of paint and glass beads is very important.1、 There are specific requirements for the initial […]
Read More -
06-10/2025The first question of the 50 common problems in marking construction is “cracks”
No one can really explain the problem of hot melt marking cracks, and most of them are the responsibility of the material factory. Little do you know, the reasons behind it are very complex. If you often encounter such problems, you can patiently read down. Believe me, as long as you look into it, it […]
Read More -
06-09/2025What are the highlights of two-component marking coatings compared to hot-melt marking coatings?
Two component marking paint is a road marking paint formulated with two sets of low viscosity active acrylic resins as film-forming agents. Before starting construction, a curing agent was added to component B and mixed evenly. The two components were mixed and applied to the road surface during the cross-linking feedback process, resulting in a […]
Read More -
06-05/2025Do you know the characteristics of road hot-melt coatings? Let me tell you, what are the methods for selecting road hot-melt coatings?
What are the characteristics and advantages of TOP ROAD road hot-melt coating as a road hot-melt marking coating? Let TOP ROAD marking paint manufacturers tell you Generally speaking, train routes on highways can reach about 10 kilometers per hour, and a skilled construction team can use vehicle routes to draw 40-50 kilometers per hour on […]
Read More -
06-05/2025What processes should be followed for the construction of marking paint?
TOP ROAD road hot-melt marking coating construction is an important component of road construction, which helps reduce the occurrence of traffic accidents and plays a certain role in maintaining traffic order. So, what process does the construction of road sign coatings follow? The editor has summarized and hopes to have a better understanding of the […]
Read More -
06-04/2025
Colorful anti slip coatings are widely used, and road hot-melt coatings are used for anti slip and reflective purposes in daily life
The ceramic particles of road hot-melt color anti-skid coating should have the characteristics of anti-skid and wear-resistant, environmentally friendly and corrosion-resistant, low water absorption, bright color, beautiful appearance, never fading, hard and firm, and long service life. Colored anti slip coatings are widely used for road paving and signage in highways, airports, airport runways, subways, […]
Read More -
05-28/2025Hot melt road marking paint ensures the safety of road traffic by marking lines
What types of lines, arrows, text, elevation markings, raised road signs, and contour markings are drawn on roads using hot-melt road marking paint. They are known as the silent police on the road and the protectors of our travels. Hot melt road marking paint marking is not a simple marking, they are all protected and […]
Read More -
05-24/2025
Formula analysis of hot melt road coatings, testing of hot melt road coatings
Hot melt paint is a material used on roads to make markings such as lanes. When the paint is heated to 180 degrees and becomes liquid, it is applied to the road using specialized equipment. Because it needs to be melted with fire, it is called hot melt. The characteristic of hot melt coating is […]
Read More -
05-23/2025Cost reduction and efficiency improvement – paint density The cost reduction and efficiency enhancement methods of hot melt road coatings help enterprises reduce costs and improve efficiency
Industry standard: 1.8 g/cm³–2.3 g/cm³. Amount of paint = density of paint x volume of marking line (area of marking line x thickness of marking line) Calculation of marking thickness 2mm For paint with a density of 1.8 g/cm³: Weight of paint per square metre = Volume × Density = 2 mm × 1 m² […]
Read More -
05-21/2025Hot melt road marking with hot melt coating to ensure the safety of road traffic
What types of lines, arrows, text, elevation markings, raised road signs, and contour markings are drawn on roads using hot-melt road marking paint. They are known as the silent police on the road and the protectors of our travels. Hot melt road marking paint marking is not a simple marking, it is all carried out […]
Read More -
05-20/2025
What are the types of colored anti slip coatings?
What are the types of colored anti slip coatings? Colored anti-skid pavement can be exposed from the color of the anti-skid aggregate itself, and can also obtain colored coating after the anti-skid coating is laid on the surface of the coating. The classification of colored anti-skid pavement coatings is based on the classification of anti-skid […]
Read More -
05-16/2025Do you know the characteristics of hot melt coatings?
What are the characteristics and advantages of TOP ROAD coating as a road marking coating? Let TOP ROAD marking paint manufacturers tell you Generally speaking, train routes on highways can reach about 10 kilometers per hour, and a skilled construction team can use vehicle routes to draw 40-50 kilometers per hour on highways. The construction […]
Read More -
05-15/2025What processes should be followed for the construction of road hot-melt marking paint?
TOP ROAD hot-melt marking coating construction is an important component of road construction, which helps reduce the occurrence of traffic accidents and plays a certain role in maintaining traffic order. So, what process does the construction of road sign coatings follow? The editor has summarized and hopes to have a better understanding of the construction […]
Read More -
05-14/2025What are the effects of moisture on the construction of marking paint?
Hot melt pavement marking coating is the most commonly used coating in specific construction, and it is also a cost-effective and relatively complete pavement marking coating product. It is also a pavement marking raw material with relatively complete construction technology. So what are the effects of moisture on the construction of marking paint? The coating […]
Read More -
05-06/2025
Some related characteristics of marking paint construction
Top road marking paint is a type of equipment that uses specific guiding devices such as lines, arrows, and text. Draw lines on the ground or other equipment to control and guide traffic, and disperse traffic flow. Road traffic markings should be drawn using pavement marking construction paint. Below, we will introduce some relevant characteristics […]
Read More -
04-30/2025What is a colored anti-skid road surface? What are the functions and features?
1、 The development of colored anti-skid pavement Since the 1860s, different road colors have been widely used to remind drivers of their driving positions, dangerous road sections, etc., in order to prevent and control road traffic accidents. We started researching colored road surfaces in the early 1980s. With the development of the economy and the […]
Read More -
04-28/2025
What are the highlights of two-component marking coatings compared to hot-melt marking coatings?
Two component marking paint is a road marking paint formulated with two sets of low viscosity active acrylic resins as film-forming agents. Before starting construction, a curing agent was added to component B and mixed evenly. The two components were mixed and applied to the road surface during the cross-linking feedback process, resulting in a […]
Read More -
04-25/2025
What are the advantages and disadvantages of hot-melt paint for road markings?
Advantages and disadvantages of various marking coatings （1） Hot melt marking Advantages: The selection of raw materials such as stone is simple, the manufacturing technology is simple, the construction is simple, the non stick tire time is short (3 minutes), and it can quickly open up traffic; Wide applicability; Thickness 0.5-2.5mm, relatively thick; The coefficient […]
Read More