Three common problems encountered during the construction of marking coatings.

A good marking paint has two very important criteria for judging enterprise standards: one is convenient construction, and the other is that the development of construction technology can have a good reflective effect in the future.
In the process of designing the construction of marking coatings, it is inevitable to encounter some social problems. Below, the editor of San Aisi Marking Coatings will explain to you that the development of construction technology can have a good reflective effect in the future. What are the three common problems encountered during the construction and design process of the San Aisi marking paint?

1. 1.The reason for poor fluidity in marking: resin acts as a “solvent” in molten coatings. If there is too little resin, it means that there is too little “solvent” to drive the flow of filler materials. No matter how high the heating temperature is, the fluidity of the coating is poor.
2. 2.The temperature of the coating continues to rise rapidly, emitting pungent gases and causing information explosion. The reason for this is that the heat absorption capacity of the resin is higher than that of filling different materials. After absorbing a large amount of heat, it can slowly increase the temperature change of the coating environment. If the technical content of the resin in the coating is too low, the coating and temperature will quickly rise during heating.
3. 3.The reason why coatings are prone to sedimentation is that molten resin supports our entire melting technology system like a skeleton structure in the molten coating. When the resin content analysis is relatively low, this spiritual support skeleton is too weak, and the filling material culture cannot be evenly dispersed in it, which is easy to deposit at the bottom of the cylinder and form slag like coatings, making it difficult for them to flow out of the reactor.

The above are the three common problems encountered during the construction of marking coatings that the Top Road editor will explain to you. Friends who need marking paint in the future can directly send me an email to contact me export@toproadtraffic.com Our company produces hot melt road coatings, retroreflective measuring equipment, hot melt kettles, road marking machines, two-component marking machines, and one-stop road construction services.
Our Top Road brand specializes in marking coatings and other marking peripheral products. Integrity is the fundamental principle of being a person and the fundamental principle of business. Having been engaged in the marking industry for more than ten years, San Aisi has always adhered to this principle and gained the trust and support of its partners with sincerity.