Road Marking Paint and Machine Manufacturer
+86-15668659958
-
03-05/2024What is the difference between the vibration type and the ordinary type of hot melt marking paint?
Melting ordinary marking coatings generally do not contain mixed beads and are generally used for parking lot markings, rural roads, and factory areas Reflective hot melt marking paint contains 20% inner mixed beads, among which vibrating hot melt marking paint contains 20% micro beads, and reinforced reflective marking paint contains 25% inner mixed beads. It […]
Read More -
03-04/2024
How to choose glass beads for producing road marking coatings?
The manufacturer of road marking coatings believes that when producing road marking coatings, attention should be paid to selecting high-quality inner mixed surface sprinkled glass beads, considering factors such as roundness, purity, gradation, refractive index, etc. At the same time, it should be noted that the glass bead treatment process corresponding to different marking coatings […]
Read More -
03-01/2024What is the difference between single and double component coatings?
What is the difference between single and double component coatings? The difference between single component and dual component Single component paint: Two component coating: The similarities between single component and dual component
Read More -
02-28/2024Marking paint manufacturers share several common problems and solutions of hot melt coatings in construction
Multiple types of coatings can be used for the construction of marking machines. The coatings used for highway markings mainly include solvent based coatings, heating based coatings, hot melt coatings (also known as melt based coatings), two-component coatings, water-based coatings, and other types. Next, let’s discuss several common problems and solutions in the construction of […]
Read More -
02-26/2024What is the composition of hot melt marking paint?
Hot melt marking paint is composed of petroleum resin, EVA, PE wax, pigments and fillers, and other materials. By utilizing the thermoplastic properties of synthetic resin, the hot melt coating has fast drying properties. By utilizing the hot melt properties of synthetic resin, the marking is firmly bonded to the road surface. Hot melt reflective […]
Read More -
02-23/2024Top Road shares the reasons and treatment methods for coating detachment after hot melt marking paint application
The same hot-melt marking paint may result in significant differences in the quality of the marking on the same road surface with different construction teams. Some markings can last for 12 months, while others can last for 6 months. Some may also fall off within a few days. The quality of coatings is certainly important, […]
Read More -
02-22/2024Some related characteristics of road marking construction coatings
Road marking paint is a specific guiding device device that applies lines, arrows, text, etc. Draw lines on the ground or other equipment to control and guide traffic, and disperse traffic flow. Road traffic markings should be marked with road marking construction coatings.
Read More -
02-21/2024
What are the requirements for the paint for the marking of parking spaces in parking lots?
The paint used for parking lot marking should be the same as that used for road marking. Please refer to the paint standards used for road marking. It is a solid powder coating that is coated on the road surface using specialized equipment in a high-temperature molten state.Requirements for parking space marking in underground parking […]
Read More -
02-20/2024Some related characteristics of road marking construction coatings
Road marking paint is a specific guiding device device that applies lines, arrows, text, etc. Draw lines on the ground or other equipment to control and guide traffic, and disperse traffic flow. Road traffic markings should be marked with road marking construction coatings.
Read More -
02-19/2024What are the key points to choose road reflective glass microbeads?
What are the key points to choose road reflective glass microbeads? Below, the editor of Oulu De will introduce it to you.
Read More -
02-18/2024Little knowledge that cannot be ignored in hot-melt marking coatings
The commonly used paint on the market is hot-melt marking paint, and there are some small knowledge that cannot be ignored. Hot melt marking coatings often produce bubbles during application. Although this defect does not affect the service life, upon closer inspection, it affects the appearance, which has troubled many construction team workers. The following […]
Read More -
02-18/2024Construction steps of hot melt marking paint
Construction steps of hot melt marking paint1、Before road cleaning construction, clean the ground to remove dust, floating slurry, and moisture.2、 Due to the fact that the hot melt marking coating construction is basically formed in one go, the route and pattern need to be marked before construction3、 The conventional equipment for hot melt coating construction […]
Read More -
02-01/2024
Introduction and Construction Technology of Fluorescent Road Surface, Night Light Road Coatings
Fluorescent pavement is a new type of decorative landscape pavement. As a typical type of landscape pavement product in the ecological greenway system, it has attracted more and more attention due to its unique appearance effect and “eye-catching mode”. In practice, fluorescent road surfaces can be designed with various colored patterns based on the different […]
Read More -
01-31/2024Steps for hot melt marking construction
1) Security measures. Make full use of safety facilities such as signs, warning flashing lights, traffic cones, and command flags, equip traffic administrators, manage pedestrians and traffic well, and prevent accidents from occurring. All safety facilities should be able to clearly identify drivers and pedestrians, facilitate vehicle passage as much as possible, ensure the safety […]
Read More -
01-25/2024Construction Plan for Road Traffic Hot Melt Markings
Road traffic marking construction technology:
Read More -
![[Sign retroreflection coefficient measuring instrument] LA-101E Retroreflection Coefficient Measuring Instrument](https://toproadtraffic.com/wp-content/uploads/2023/06/10.jpg)
01-22/2024[Sign retroreflection coefficient measuring instrument] LA-101E Retroreflection Coefficient Measuring Instrument
LA-101E Sign Retroreflective Coefficient Tester is a portable road traffic safety detection device that uses standard transfer indirect measurement methods to measure the optical characteristics of various reflective safety signs. It is suitable for on-site testing and inspection of road traffic reflective products, vehicle safety reflective products, safety production signs, etc. Adopting a high-precision, highly […]
Read More -
01-10/2024What kind of paint is used for road marking? Which is more environmentally friendly and durable?
Road marking is a very important part of traffic management, as it can indicate the direction and path of vehicles, ensuring smooth and safe traffic. The quality and effectiveness of road marking largely depend on the paint used. So, what kind of paint is used for road marking? Which type of paint is more environmentally […]
Read More -
01-03/2024
Formula and usage method of hot melt marking paint?
Mix various raw materials of the coating together and stir thoroughly to ensure uniformity. Especially pay attention to adding RQT-K-1, a special fluorescent whitening agent for hot melt coatings, with a dosage of about 2/10000.Pour the well mixed marking paint into the molten axe and start heating.Heating to around 220 ℃, the coating hot melt […]
Read More -
12-14/2023
The reason for poor circulation of road markings
A good marking paint has two key distinguishing standards: one is convenient engineering construction, and the other is that it has a very good reflective effect after engineering construction. During the entire construction process of the marking paint project, it is inevitable to encounter some difficulties. The manufacturer of highway transportation equipment has summarized three […]
Read More -
11-29/2023
“How to improve the reflection coefficient of hot-melt markings”
Several factors affecting the reflective coefficient of hot-melt marking paint In the industry of road marking, there is a saying that “three parts paint, seven parts construction”, which indicates that the level of construction technology has a great impact on the quality of road marking. So, what factors actually affect the height of the reflection […]
Read More